A port of the monome 40h firmware to the arduino.
Authors: Jordan Hochenbaum, Owen Vallis, Ben Southall, Unsped
Open-source, for non-commercial use only.
Official Arduino Website: http://arduino.cc (v15 confirmed to work)
Wikipedia Arduinome Page: http://en.wikipedia.org/wiki/Arduinome
Sourceforge page for Arduinome: http://sourceforge.net/projects/arduinome/
http://flipmu.com/work/arduinome/ - Parts, Instructions, Tips…etc (original guide from the Arduinome firmware authors)
http://prodavid.wordpress.com/2009/06/17/arduinome-build-documentationguide/ UK-focused build guide for Arduinome 64 with Bibo board.
http://starfiretech.wordpress.com/2009/10/13/my-arduinome-128-is-finished/ - Blog post on how to build a custom Arduinome 128 http://starfiretech.wordpress.com/2009/04/22/how-to-setup-a-arduinome-128/ - How to setup ArduinomeSerial to use two Arduinomes as a Arduinome 128 (80h)
http://starfiretech.wordpress.com/2009/04/02/arduinome-working/ Build of a Arduinome 128 using monome.org button kits.
http://www.julienbayle.net/diy/LiveInterface [bon]ome project ::: series protocol for 64, rgb management & serial/osc router
http://blog.homegrown-sounds.de German Build log + Arduinome guide in progress .freak
http://ilikeblinkystuff.blogspot.com Arduinome build log
http://chromoose.tumblr.com/tagged/arduinome : 2 8×8's, giving a 128 arduinome.
http://bling-boing.blogspot.com/ german arduinome + custom enclosure blog
http://flipmu.com/work/arduinome/hardware/ (standard sparkfun button arduinome)
http://nomeist.com/my-parts-list (standard sparkfun button arduinome)
http://dovemouse.wordpress.com/2008/09/17/arduinome-shield/ (standard sparkfun button arduinome)
http://post.monome.org/comments.php?DiscussionID=2822 (thread includes ZIP with sparkfun button faceplate files from xndr)
DXFs for hornblower's MDF arduinome enclosure on thingiverse - http://www.thingiverse.com/thing:6519
Curious Inventor's Monome 40h/Arduinome cases (only work with original Monome buttons, not Sparkfun buttons): http://curiousinventor.com/store/product/222
Flipmu files for MachinCollective style enclosure (slightly larger for the Chronome PCB, but will fit all Bibo boards, feel free to modify) - http://flipmu.com/files/2011/04/Chronome_Enclosure.zip
MachineCollective's Sparkfun button-based cases, made to order: http://news.machinecollective.org/?p=59
NB. As of February 2010 there has been no sign of any orders being fulfilled from MachineCollective for at least 6 months. Many people have tried to contact xndr to no avail. Order with extreme care.
MachineCollective's Templates for custom bottom engraving (email@example.com for instructions on how to use): http://www.bsom.org/machinecollective_engraving_templates.zip
Eagle files for hornblower's single-sided PCB arduinome shield on thingiverse - http://www.thingiverse.com/thing:6520
Eagle files created by Unsped: http://unsped.googlepages.com
Overlay picture of correct wiring between shield and buttonpads: http://www.flickr.com/photos/blackedition/3204619069/in/photostream/
Wiring schematic: http://www.flickr.com/photos/54829881@N00/2668147766
Layout for stripboard version. http://www.flickr.com/photos/jiparis/3112281038/
“understanding 74HC165 multiplexing” - detailed description of how the Arduinome shield detects button-presses: http://post.monome.org/comments.php?DiscussionID=4282
Sparkfun buttons and button PCB's: http://www.sparkfun.com/commerce/advanced_search_result.php?keywords=button+pad+4x4&x=0&y=0&search_section=products
Unsped shield - left-overs from a zero-profit group buy (in stock as of April 6 2009) http://www.curiousinventor.com/store/product/267
As well as using the Sparkfun button pads, you can also use the keypads from the 40h kits.
http://docs.monome.org/lib/exe/fetch.php?media=tech:ports:monome_arduinome.jpg - Cable Orientation
Chronome, RGB/Pressure sensitive Arduinome - http://flipmu.com/work/chronome/
ChronomeSerialOSC (modified serialOSC for color and pressure support) - http://flipmu.com/work/chronome/chronome-serialosc/
octinct: early RGB arduino based monome - http://www.hangar.org/wikis/lab/doku.php?id=start:octint
MiniMonome, An RGB Monome based on the Arduino: http://www.thebox.myzen.co.uk/Hardware/Mini_Monome.html
[bon]ome - RGB Monome Clone: http://www.julienbayle.net/diy/LiveInterface/
NOTE: This functionality is now included in ArduinomeFirmware 3.2
http://post.monome.org/comments.php?DiscussionID=3278&page=1#Item_1 (this thread, courtesy of Alias, includes code and parts for adding an accelerometer to arduinome)